Urge
Continuous forms traction unit

 
The traction unit Urge helps pulling continuous forms on the printers. When the printer stops, the traction process is also interrupted due to the low pressure on the paper, preventing an unnecessary paper build-up.
The equipment can be used for printing on one or both sides and also with an “H” printing line.
Urge
Specifications
Dimensions Length 576 mm, Width 325 mm, Height 292 mm +/- 25 mm
Weight 27Kg
Power requirements 110 V AC +/- 5% (grounded), 60 Hz, 1 A, 186 W, 276 BTU/h
Initial speed 80 m/min
Forms Length from 4" (102 mm) to 25" (635 mm)
Width from 3,5 " (90 mm) to 20 " (510 mm)
Paper weight from 63 g/m² to 150 g/m²